Language


Reservdelar - Försäljning - Service - Renoveringar Sales - Repairs - Renovations - Spare Parts STUDER and REVOX Tape Recorder STUDER SWEDEN

Delivery EU and US
Others contact
Support


Verified


Authorized Globally Revox Studer and Audio Specialist


Installation  Audio

Specifications DBX 160 A

Input Connectors 1/4" TRS and XLR, Floating Balanced; XLR: Pin 2 hot Phone: Tip Hot

Input Impedance 40k Max Input +24dBu, Balanced or Unabalanced (Absolute) CMRR >45dB (any Frequency) Detector Input Connector: 14" TRS phone, Floating Balanced Detector Input Impedance >200k Detector Input Max Level +28dBu, Balanced or Unbalanced Output Connectors 1/4" TRS phone, Unbalanced; XLR, floating balanced; pin 2 hot Output Impedance Balanced 200 ohm, unbalanced 100 ohm Max Output (Balanced): +24dBm; <0.3% THD; (Unbalanced): +20dBm; <0.3% THD  Noise <-90dBu, Unweighted (20Hz - 20kHz) Frequency Response 20Hz -20kHz, +0, -0.5dB; +0, -3dB 0.5Hz and 90kHz. THD <0.2%, Typical, any amount of compression up to 40dB @ 1kHz Compressor Threshold Range -40dBu to +20dBu Compressor Threshold Characteristic OverEasy® or hard knee  Compressor Ratio Variable 1:1 to :1 thru to -1:1; >60dB maximum compression Compressor Attack Time Program dependent; typically 15ms for 10dB, 5ms for 20dB, 3ms for 30dB Compressor Release Time Program Dependent; Typically 8ms for 1dB, 80ms for 10dB, 400ms for 50dB; 125dB/sec rate Dynamic Range >113dB Gain Adjustment Range Variable from -20dB to +20dB  Stereo Coupling True RMS Power summing Summing 1/4" TRS phone jack Operating Voltage DO: 90-130VAC, 50/60Hz; EU: 200-250VAC, 50/60Hz Power Connector IEC receptacle Dimensions 1.75" x 19" x 6.5" (4.45cm x 48.2cm x 16.51cm) Unit Weight 4.452 lbs (1.99 kg)




In Stock


Basic technical data (PDF)




Model

Price/SEK

DBX 160A Compressor/Limiter

4.920:-

Specifications DBX 166XS

Input Connectors 1/4" TRS, female XLR (pin 2 hot)

Input Impedance >50kΩ balanced, >25kΩ unbalanced

Max Input >+24dBu, Balanced or Unbalanced

Input Type Electronically balanced/unbalanced, RF filtered

Sidechain 1/4" TRS Phone, Normalled: Ring = Output (send); tip = Input (return) Sidechain Impedance Tip = >10kΩ (Input), Ring = 2kΩ (Output)  Sidechain Max Input Level >+20dBu (tip/input); >+20dBu (ring/output) Output Connectors 1/4" TRS, female XLR (pin 2 hot) Output Impedance 120Ω balanced, >60Ω unbalanced Max Output +21dBu balanced/unbalanced into 2kΩ or greater; >+18 dBm balanced/unbalanced (into 600Ω) Frequency Response 20Hz - 20kHz; +0, -0.5dB, Typical 3dB points are 0.35Hz and 110kHz, unity gain Noise <-90dBu, 22Hz to 22kHz, no weighting, unity gain THD+Noise Typically <0.04%; Any Amount of Compression Up to 40dB@1kHz IMD Typically <0.08% SMPTE @ +10dBu (15dB Gain reduction) Compressor Threshold Range -40dBu to +20dBu Compressor Threshold Characteristic Selectable OverEasy® or hard knee Compressor Ratio Variable; 1:1 to Infinity:1; 60dB Maximum Compression Compressor Attack Time Variable program-dependent; 3ms to 340ms for 15dB gain reduction Compressor Release Time Variable program-dependent; 200dB/Sec to 3dB/Sec Expander/Gate Threshold Range OFF to +15dBu Expander/Gate Ratio 10:1 Expander/Gate Max Depth >60dB Expander/Gate Attack Time <500µs (from Maximum Depth) Expander/Gate Release Time Adjustable, 30ms to 3sec (to 30dB attenuation) Limiter Threshold Range 0dBu to +20dBu  CMRR >40dB, typically >55dB at 1kHz

Interchannel Crosstalk <-80dB, 20Hz to 20kHz Dynamic Range >115 dB, unweighted Stereo Coupling True RMS Power Summing™

Power Consumption 15 Watts Maximum

Operating Temperature 0°C to 45°C (32°F to 113°F)

Dimensions 1.75" x 19" x 6.75" (4.45 cm x 48.2 cm x 17.15 cm)

Unit Weight 5.05 lb (2.29 kg)

Shipping Weight 7.20 lb (3.27 kg)

Reference 0dBu = 0.775Vrms  

Operating Voltage 100 VAC 50/60Hz; 120VAC 60Hz; 230 VAC 50/60 Hz



In Stock


Basic technical data (PDF)




Model

Price/SEK

DBX 166XS

1.820:-

Specifications DBX 223Xs

Input Connectors 1/4" TRS Input Type Electronically balanced/unbalanced, RF filtered  Input Impedance Balanced >50k ohm, unbalanced >25k ohm Max Input >+22dBu balanced or unbalanced  CMRR >40dB, typically >55dB at 1kHz Output Connectors 1/4" TRS  Output Type Impedance-balanaced/unbalanced, RF filtered  Output Impedance Balanced 200 ohm, unbalanced 100 ohm  Max Output >+21dBu balanced/unbalanced into 2k ohms or greater Bandwidth 20Hz to 20kHz, +/-0.5dB  Frequency Response < 3 Hz to > 90 kHz, +0/-3 dB  Signal to Noise Ratio Ref: +4 dBu, 22 kHz measurement bandwidth  Signal-to-Noise (Stereo Mode) >94dB (Low Output), >91dB (High Output) Signal-to-Noise (Mono Mode) >94dB (Low Output), >93dB (Mid Output), >91dB (High Output) Dynamic Range > 106 dB, unweighted, any output  THD+Noise < 0.004% at +4 dBu, 1 kHz; < 0.04% at +20 dBu, 1 kHz  Interchanne Crosstalk < -80 dB, 20 Hz to 20 kHz  Crossover Frequencies (Stereo Mode) Low/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting) Crossover Frequencies (Mono Mode) Low/Mid: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting); Mid/High: 45 to 960 Hz or 450 Hz to 9.6 kHz (x10 setting)  Crossover Filter Type Linkwitz-Riley, 24 dB/octave, state-variable Low cut Switch Activates 40 Hz Butterworth, 12 dB/octave high-pass filter, one switch per channel. Phase Invert Switch Inverts the phase at the output, one switch per output. x1 / x10 Switch Multiplies the low-high(mono: low/mid and high/mid) crossover frequency range of the front-panel markings by a factor of 1 or 10, one switch per channel. Mode Switch Selects stereo/mono and 2/3-way operation LF Sum Switch Selects normal (stereo) or mono-summed low frequency operation and disables Ch 2’s low output phase invert LED to indicate that this output is not operational in the LF sum mode. Indicators Stereo Operation (Green); Mono Operation (Yellow); Low Cut (Red-per channel); x10 (Green-per channel); Phase Invert (Red-per output) Operating Voltage 100 VAC 50/60 Hz; 120 VAC 60 Hz 230 VAC50 HZ Operating Temperature 32°F to 113°F (0°C to 45°C)  Power Consumption 15W Power Connector IEC receptacle Dimensions 1.75" H X 19" W X 6.9" D (4.4cm x 48.3cm x 17.5cm) Unit Weight 3.7 lbs. (1.7 kg) Shipping Weight 5.4 lbs. (2.5 kg)





In Stock


Basic technical data (PDF)




Model

Price/SEK

DBX 223Xs

1.750:-

Specifications DBX 231S

Dual Channel 31-Band Equalizer

Input Connectors 1/4" TRS, female XLR (pin 2 hot)

Input Type Electronically balanced/unbalanced, RF filtered  

Input Impedance Balanced 40k ohm, unbalanced 20k ohm  

Max Input >+21dBu balanced or unbalanced

CMRR >40dB, typically >55dB at 1kHz  

Output Connectors 1/4" TRS, male XLR (pin 2 hot)

Output Type Impedance-balanced/unbalanced, RF filtered Output Impedance Balanced 100 ohm, unbalanced 50 ohm Max Output >+21dBu balanced/unbalanced into 2k ohm or greater; >+18dBm balanced/unbalanced (into 600 ohm)

Bandwidth 20Hz to 20kHz, +0.5/-1dB

Frequency Response <10Hz to >50kHz, +0.5/-3dB

Dynamic Range 108dB

Signal to Noise Ratio 90dB THD+Noise <0.004%

Interchannel Crosstalk <-80dB, 20Hz to 20kHz

Bypass Switch Bypasses the graphic equalizer section in the signal path  

Low cut Switch Activates the 50Hz 12dB/octave high-pass filter  

Range Switch Selects either +/- 6dB or +/-12dB slider boost/cut range

Operating Voltage 100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz

Power Consumption 15W

Power Connector IEC receptacle


In Stock


Basic technical data (PDF)




Model

Price/SEK

DBX 231S Equalizer

1.950:-

Specifications DBX Driverack 260

Loudspeaker Management System

Input (2) line inputs. (1) RTA Mic input

Input Connectors (2) Female XLR line inputs. XLR RTA Mic input

Input Type Electronically balanced/RF filtered

Input Impedance >40k ohm

Max Input +30dBu with input jumpers in +30 position

CMRR > 45dB

Mic Preamp Phantom Power +15VDC (RTA)

Mic Preamp Equivalent Input Noise (EIN) < -110dB, 22Hz-22kHz, 150 ohm (RTA)

Output 6 total

Output Connectors Male XLR

Output Type Electronically balanced, RF filtered  

Output Impedance 120ohm

Max Output +22dBu

A/D Converter dbx Type IV™ Conversion System

A/D Dynamic Range (line) >113 dB, A-weighted, >110 dB unweighted

Type IV Dynamic Range >119 dB, A-weighted, 22kHz BW; >117 dB, A-weighted, 22kHz BW

Sample Rate 48kHz

D/A Dynamic Range 112 dB A-weighted, 109dB unweighted

Dynamic Range >110 dB A-weighted, >107dB unweighted

THD+Noise 0.003% typical at +4dBu, 1kHz, 0dB gain

Frequency Response 20Hz – 20kHz, +/- 0.5dB

Interchannel Crosstalk >110dB, 120dB typical, (input-to-output: >100dB)



In Stock


Basic  data



Model

Price/SEK


9.650:-

Specifications DBX 215S

Dual Channel 15-Band Equalizer

Input Connectors 1/4" TRS, female XLR (pin 2 hot)

Input Type Electronically balanced/unbalanced, RF filtered  

Input Impedance Balanced 40 kOhm, unbalanced 20 kOhm

Max Input >+21dBu balanced or unbalanced

CMRR >40dB, typically >55dB at 1kHz  

Output Connectors 1/4" TRS, male XLR (pin 2 hot)

Output Type Impedance-balanced/unbalanced, RF filtered

Output Impedance Balanced 100 ohm, unbalanced 50 ohm

Max Output >+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm)  

Bandwidth 20Hz to 20kHz, +0.5/-1dB

Frequency Response <10Hz to >50kHz, +0.5/-3dB

Dynamic Range Typically >112dB

Signal to Noise Ratio Typically >95dB

THD+Noise <0.003%

Interchannel Crosstalk <-90db, 20Hz to 20kHz

Bypass Switch Bypasses the graphic equalizer section in the signal path

Low cut Switch Activates the 50Hz 12dB/octave Bessel high-pass filter

Range Switch Selects either +/- 6dB or +/- 12dB slider boost/cut range

Operating Voltage 100VAC-240VAC 50/60Hz

Power Consumption 15W

Power Connector IEC receptacle

Unit Weight 4.8 lbs.(2.2 kg)

Shipping Weight 6.2 lbs.(2.8kg)

Dimensions 1.75" (4.4cm) H x 6"(15.24cm) D x 19" (48.26cm)  






In Stock


Basic technical data (PDF)



Model

Price/SEK

DBX 1231

3,690:-

http://dbxpro.com/en/

products/driverack-260

DBX Aktiva delningsfilter.


Ordering and payment PayPal customers outside Sweden

When ordering: Copy Product name/ITEM No. and send to us by email: order@studersweden.se

Don't forget to enter your name/address. You will receive an order confirmation and payment basis from us to your specified email address.


When paying PayPal

Enter your name and address. You will then receive payment dossiers via your email that you use to make payment through PayPal.


Beställning och betalning


Vid beställning:

Kopiera produktens namn/artikel nr. och skicka till oss via e-post: order@studersweden.se

Glöm inte att ange ditt namn/adress. Du kommer få orderbekräftelse och betalningsunderlag från oss till din angivna e-postadress.


Exempel på fraktavgifteravgifter.


© Copyright 2019 Studer Sweden All Rights Reserved


Order

Support

Payment Outside Sweden

Öppettider

Produkter

Studer and Revox

AKG - Neumann

Crown

Lexicon - DBX

Soundcraft

Marantz

JBL Högtalare

+20 andra

Välj/Select


Telefon Support

14-16:00

Måndag - Onsdag


Sorry!

Phone support
only in Sweden


073 - 578 00 35